This is the Great Planes ElectriFly PolyCharge DC Powered|
1-3 Cell Lithium Polymer Battery Charger.
Designed for 1-3 cell Lithium Polymer batteries ONLY (NOT for Lithium
Ideal for small electrics-Park Flyers, small to medium 3D airplanes,
250 - 500 - 1000mA selectable Charge current
Warning indicators for voltage input errors, output reverse polarity
and open circuit errors
High intensity Blue LED status indicator for voltage input errors,
output reverse polarity, and open circuit errors
One year limited warranty (USA and Canada only)
One Great Planes 1-3 Cell Lithium Polymer Battery Charger with 7.5A
fuse, alligator input clips, Red 2-pin output connector and
12V Power Supply such as GPMP0901. Do not apply more than 15V to
the charger input as permanent damage could result.
Input Voltage: 11-15V DC
Battery Types, # Cells: 1-3 Lithium Polymer cells (3.6-11.1V LiPo)
Fast Charge Current: 250, 500, 1000mA
Fast Charge Termination: "Constant Current/Constant Voltage"
Status Indicators: High intensity Blue LED, audible buzzer
Input Connectors: Alligator clips
Case Size: 2.2" x .9" x 3.5" (56x23x89mm)
Weight: 4.35oz (123g)
Length of Input Lead: 27" (686mm)
Length of Output Lead: 4" (102mm)
Important! Always Charge LiPo packs in a fireproof location, such as
a metal container (like a metal ammo box) or on ceramic tile.
Always monitor the area with a smoke or fire alarm
Have an ABC type fire extinguisher available at all times
NEVER leave the battery unattended during Charging
To use this charger with the ElectriFly BP and PS series LiPos wired
for Balancing, one must use the Equinox and remove the
Red 2-pin plug and install 4mm female bullet connectors (GPMM3115)