This is the 1/24 scale Dumas 19' 1940 Barrel Back Model Boat Kit.
The Dumas Barrel Back kit (Static Displau only) allows the less
experienced modeler the opportunity to develop their planking skills,
building the confidence needed to proceed to a more advanced model. At
the same time this kit allows the advanced modeler to go beyond the basic
kit and add details to give it their own personal touch.
FEATURES: Laser cut wood parts
Numerous detailed parts included
Cast metal parts (Rudder, Propeller, Gas Cap, and more)
INCLUDES: Detailed written instructions w/diagrams, parts locator sheet and
spare parts order form
Pedestals (made of wood)
Vacuum Formed Base (Plastic)
SPECS: Length: 9½" (241mm)
Beam: 3" (76mm)
REQUIRES: Hobby Knife with #11 blades: RMXR6909
Carpenters wood glue
Thick cyanoacrylate (CA) Glue: GPMR6015
Sandpaper-Corse (60-80 GRIT), Medium (100-150 GRIT), Fine (220 GRIT)
¼" and ½" Paint Brush:
¾" Wide Masking Tape
Assorted drull bits: 1/32"(NO.67), 1/16", 1/8" and 1/4" Dia.
COMMENTS: PER DUMAS: Please check your entire kit before beginning the
construction phase because missing parts will only be sent free
The boat can be painted any color scheme of modeler's choice. However
Dumas has supplied a list of paints that they use on the boat.
PAINTS: TESTORS ENAMEL (SPRAY)
Flat Gray Primer- (TESR-2437)
Gloss Dark Red- (TESR-2404)
Gloss Clear- (TESR-2461)
TESTORS ENAMEL (BOTTLE)
Flat Tan- (TESR-2103)
Flat Lt. Gray (TESR-2163)