CAD engineered interlocking parts make building a breeze.
ABS strips for the control surfaces easily simulate the full-scale
Cessna's corrugated Fowler flaps, ailerons, and elevator.
All the Wood to Build the Kit, Plastic Cowling, Clear Lexan Wind-
shields, Plastic Wheel Pants, Two-Piece Aluminum Landing Gear,
Plastic Wing Fairings, Decal Sheet, Pushrods, Rolled Plans,
Instruction Book, Adjustable Engine Mount, and misc. Hardware
Wingspan: 81" Wing area: 906sq.in. Length: 64.5"
Weight: 10-12lbs. Wing loading: 23-28oz/sq.ft.
Throws: Hi Rate Low Rate CG: 4" aft of le @ root
Elev 1-1/16" each 3/4" each way Flaps: 1" Takeoff
Rud 1" each way 5/8" each way 2" Landing
Ail 5/8" each way 1/2" each way
.61-.91 2-stroke or .91-1.20 4-stroke Engine
4-6 Channel Radio
5-7 servos (ailerons and flaps use two servos each)
5th and 6th channels for optional flaps and lights (see ACG for info)
4-plus Rolls of Covering
Building and Field Equipment
(Please see all information on this lighting kit in its ACG)
YOU WILL NEED an additional cowl light to use this lighting kit
Customer will have to call RAM to get this and its wiring
Balsa USA produces a scale float kit which would work for this model.
Decal Sheet CES6D01 in the kit are available from GPM only. This will
be required for the Cockpit Kit (TOPQ8401). Decal Sheet includes
gauges for the instrument panel.
(1) 8¼" L X 3¼" H Black, Red and White instrument panel
(1) 3¾" L X ¾" H Black, Red and White Top Flite logo
(2) 12" L X 2½" H White letters/numbers--N735PE
(2) 2½" L X ½" H White SKYLANE insignias
Contains the following Black 1/8" H sets of words-(5) NO STEP,
(1) FUEL DRAIN, (1) OIL DRAIN
Contains "vent" decals shown pictured on the engine cowl