Venom NiMH 6-Cell 7.2V 3000mAh Stick Universal Plug

Tower Stock# LXHUJ9  •  Manufacturer Stock# 1532
Venom NiMH 6-Cell 7.2V 3000mAh Stick Universal Plug (large view)
Quantity Discounts Available
Save $2.61
3 for $55.86
Save $5.82
6 for $111.12
Save $12.84
12 for $221.04
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is a Pre-Assembled 6 cell, 3000mAh Nickel Metal Hydride Battery Pack.
NIMH Batteries Have A Different Chemistry Than NiCd Batteries So They
Require Different Charging Methods (See COMMENTS).


Pre-assembled NiMH Sub-C size cells for use with 1/10 scale R/C
vehicles, also great for electric airplanes
Venom Universal Four Plug System allows connectivity between today's
four most common battery plugs, Tamiya, Traxxas, Deans and EC3,
simply attach desired plug to Venom plug on battery's wire leads
Offers 50% longer run times verses 2000mAh packs.
Great for endurance racing.
Higher average voltage means more power verses NiCd packs.
NiMH cells have no discharge memory so there is no need to deep
discharge them by shorting out the cells. This damages the cells.
No need to be recycled, NiMH cells are environmentally friendly.


One Assembled 6 cell, 3000mAh NiMH Battery Pack w/Tamiya, Traxxas
Dean's and EC3 Plugs


Charger: Having Negative DeltaV or Zero DeltaV Peaking capabilities
Discharger: Having capabilities to properly discharge batteries


Charge Rate: 3-4A with a delta peak detection set at
10-20 millivolts (.01 to .02V)
Length: 5.39" (137mm)
Width: 1.77" (45mm)
Height: 0.94" (23.9mm)
Weight: 14.4oz (408g)
Maximum Cycles Per Day: Three, with a 1 to 2 hour rest period
between cycles
Dead Shorting: Not Recommended


Do Not dead short the cells after discharging or store them with a
resistor across the pack. They do not need this and it damages
the battery pack. Store cells with voltage in them.
Do not trickle charge
Use a digital voltmeter if your charger does not have one, to monitor
the voltage. As soon as the voltage stops rising, the pack is
charged. Do not let voltage drop like you would with NiCd cells.
Charger MUST be able to adjust the negative peak charge rate.
Heat or Overcharging Will Deteriorate or Damage NiMH Cells.

EEW 9/15/04
updt jxs 04/21/10
updated tlc 7/2/14

‐ Mailing Address ‐
‐ Additional Contact Information ‐