Top Flite Replica Radial Engine 1/5 Scale

Tower Stock# LXHY68  •  Manufacturer Stock# TOPQ7903
Top Flite Replica Radial Engine 1/5 Scale (large view)
Quantity Discounts Available
Save $1.34
2 for $28.64
Save $2.25
3 for $42.72
Save $4.92
6 for $85.02
Notes from our tech department:
This is an Optional Dummy Radial Engine for Any 1/5 Scale Airplane.
This Mounts Into the Front of the Cowling of a Model Airplane and Goes Between
the Engine and the Propeller to Give the Appearance of the Full Scale Airplane.
It is Patterned after the Pratt & Whitney Radial Engines that Powered Numerous
Aircraft from the "Golden Age" of Aviation.


Perfect for Giant Scale Top Flite Corsair or Stinson SR-9 Kits
Ideal for Any 1/5 scale Warbird with 8" x 9" Frontal Opening
Improves Air-Flow to your R/C Engine by Directing Air Onto the
Cylinder, for Cooler Operation.
Precise Scale Enhances Model's Appearance
Easy to Assemble and Paint (Paint Not Included)
Includes Full Illustrated Instructions


One ABS White Plastic Radial Engine Sheet
Six Gray Plastic Push Rod Tubes (8" in length)
One Metal Wire for Ignition Leads (16" in length)
One Fully Illustrated Instruction Sheet


Hobby Knife w/#11 Blade
Hand Drill or Dremel MultiPro
1/16" & 1/8" Drill Bits
Medium CA Glue
Rubber Cement or Spray Adhesive
6-Minute Epoxy
1/8" x 10" x 10" Lite Plywood
Round File or " Drum Sander
Small Paint Brushes
Scroll or Coping Saw
#100 & #240 Grit Sandpaper
Paint: Crankcase - Gun Ship Gray Cylinders - Euro Gray
Background - Flat Black Push Rod Tubs - Silver
Ignition Leads - Red Rocker Arm Covers - Black
Spark Plug Connectors - Gold or Copper
Cylinder Fins, Weathing and ID Plate - Silver and Black
Clear Coat - Flat Clear Finish (2 Very Light Coats)


After Trimmed to Fit Model:
Diameter: 8"
Depth: 1"
JAL 1/29/99

See Tower Catalog page 65.
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐