Tower Hobbies Uproar 40 Kit .32-.40,48"

Tower Stock# LXJA52  •  Manufacturer Stock# TUP4
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
Money Saving Combos
 
LZ0576
 
LZ0583
 
LZ0577
Notes from our tech department:
Get a great Fun-fly model with a great price in the Tower Hobbies Uproar 40
model airplane kit.

INCLUDES

Die-cut plywood and balsa wood for construction, pushrods, canopy,
control horns and miscellaneous hardware.

REQUIREMENTS

.32-.40 2 stroke or .40-.48 4 stroke engine, 4 channel radio with 5
servos (2 servos run the ailerons), a Y-harness, 2 rolls of covering,
miscellaneous hardware (see primary required items in the ACG),
& miscellaneous building & field equipment. Also requires a
2" to 2" spinner or a prop nut.

SPECIFICATIONS

Wing span: 48" Wing area: 578 sq in Length: 42"
Wing loading: 14-16 oz sq ft Weight: 3.5-4lbs
Center of Gravity: 3" (76.2mm) back from the wing leading edge

COMMENTS

There are NO DECALS included. See "Notes" below.
The wing is Glued to the fuselage (not bolted)
Made of all wood
Semi-symmetrical wing
kpm 8/31/95
ir/jl
Control Throws: High Rate Low Rate
Elevator " up 3/8" up
" down 3/8" down
Rudder 1" right Same as high rates
1" left
Ailerons: " up 3/8" up
" down 3/8" down

NOTES: Replacement parts are available through Great Planes.
Please see the parts listing on the web page for this kit
here at www.towerhobbies.com for full parts listing and parts
purchasing information.
The Purple Tower Hobbies arrow logo decal that is in the kit can
be obtained through GP Manufacturing (DECAL013).

Resources
See Tower Catalog page 38.
Know Before You Fly
Easy RC: Airplanes
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐