||NOTES FROM OUR TECH DEPARTMENT
This is the Bachmann® E-Z Command® 5 Amp Power Booster.|
Suitable for Ages 8 & Older.
Intended for indoor use only.
Provides extra current to the track so an increased number of
DCC locomotives can run on your HO, N, O, or Large Scale layout.
Output voltage can be adjusted to meet your scale requirements.
Can be used with any NMRA/NEM-conformant DCC system.
Air vents and a fan to ensure proper ventilation and prevent
SAFETY FEATURES include:
* Thermal overload protection
* Opto-isolation (current) interface that consumes 30ma. This
eliminates any possiblility for hidden ground loops thru
your power station
* 7V signal on the DCC bus to prevent the booster from
accidentally sending power to track when the command station
stops sending signals
Green LED indicates that power is on.
Red LED indicates an overload or short circuit. The Power Booster
is protected by a thermal circuit breaker which resets when the
short circuit or overload is corrected.
Both printed and DVD format instructions.
(1) E-Z Command® Power Booster
(1) 5 Amp Power Supply
(1) E-Z Command® Signal Input Wire
(1) Universal Signal Input Wire
(1) Track Output Wire
Power Supply Input: DC 18V 5A
Output (Track Voltage): selectable 14V or 18V
Output Current: limited to a max. of 5A
– If you need more information, use these Bachmann resources –|
Web Site: http://www.bachmanntrains.com/
1400 EAST ERIE AVENUE
PHILADELPHIA, PA 19124
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following: