This is the Wing Tote 42" Double Wing Bag.
Designed for R/C planes with two separate wing panels.
Constructed of 600 Denier nylon, durable and water resistant
Pocket with Velcro flap for wing pole or joiner is located on front
Additional pocket on back of bag to carry extra props
Inside is lined with heavy fleece to protect plane covering
3/8" (10mm) thick closed cell foam between outer nylon and inner
Center also has layer of 3/8" (10mm) thick closed cell foam enclosed
in fleece and secured by Velcro that separates the two wings
Woven shoulder straps are spaced to balance on modeler's shoulder
with 1-1/2" (38mm) webbing for comfort, also has lower horizontal
Two zippers go around three sides to allow wing to be inserted easily
zippers don't go completely around the sides reducing the chance of
wing falling out in case bag is accidentally left open
One Wing Tote 42" Double Wing Bag
Length: 42" (1066mm) Width at Wide End: 22" (559mm) Width at Narrow End: 14" (356mm)
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.