This is the Wing Tote 42" Double Wing Bag.
            Designed for R/C planes with two separate wing panels.

FEATURES: Constructed of 600 Denier nylon, durable and water resistant
          Pocket with Velcro flap for wing pole or joiner is located on front
            of bag
          Additional pocket on back of bag to carry extra props
          Inside is lined with heavy fleece to protect plane covering
          3/8" (10mm) thick closed cell foam between outer nylon and inner
            fleece
          Center also has layer of 3/8" (10mm) thick closed cell foam enclosed
            in fleece and secured by Velcro that separates the two wings
          Woven shoulder straps are spaced to balance on modeler's shoulder
            with 1-1/2" (38mm) webbing for comfort, also has lower horizontal
            strap
          Two zippers go around three sides to allow wing to be inserted easily
            zippers don't go completely around the sides reducing the chance of
            wing falling out in case bag is accidentally left open

INCLUDES: One Wing Tote 42" Double Wing Bag

SPECS:    Length: 42" (1066mm)
          Width at Wide End:  22"  (559mm)
          Width at Narrow End: 14" (356mm)

                                                                     jxs 3/1/05
                                                                         ir/jxs
                                                               updt jxs 6/30/06
                                                              updt jxs 05/27/11