This is a Two-piece Two-Blade 2" White Nylon Spinner with a Nylon Backplate

INCLUDES: One spinner cone
          One backplate
          Two 3/32 x 6/32 S/T screws
          Instructions on header card

SPECS:    Spinner Diameter: 2"
          Spinner Backplate Thickness: 1/8"
          Crankshaft hole: Drilled for ¼" with drill guides for 7mm & 5/16"

COMMENTS: Instructions state that this is a sport plastic spinner and not
           designed for use with high performance engines or engines with
           tuned pipes. Operation above 14,000 RPM is not recommended.

          If you need a spinner for a 3/16" shaft, you will need to use a
           smaller spinner (either the 1½" or the 1¾") or use a Du-Bro spinner
           which includes adapters for various size shafts.
                                                                    NNA-6/14/94
                                                                          ir/jl
         instructions, 3/16" shaft info, Dubro, & "drilled for" updt tjt 072705