This is Great Planes Pro Epoxy Finishing Resin. This Epoxy is used when
fiberglassing or fuel-proofing a kit. The resin and hardener must be mixed
together and applied. The working time is 45-50 minutes so there is plenty
of time to work the resin into the fiberglass. It will cure in about 3 hours
with a full cure in 24 hours. Also, there's no unpleasant odor or waxy buildup.

INCLUDES: One 4.5oz bottle of Resin
          One 4.5oz bottle of Hardener
          One Set of instructions

REQUIRES: For fuel proofing just mix and apply to surface. If fiberglassing
           3M 77(MMMR1990) will be required to make the fiberglass stick before
           the actual resin is applied. For mixing use cups, brushes or sticks.

COMMENTS: This will be best used to fiberglass wings, fuselages, and to make
           fiberglass cowls along with fuel-proofing engine compartments.
                                                                    2-28-97 djg
                                                                          ir/jl