||NOTES FROM OUR TECH DEPARTMENT
This is the 10x1.25x50mm Hex Cap Screw Adapter Kit from Tru-Turn.|
Black steel washer and hex cap screw.
The screw is tapped 10-32 for cone screw.
Used to mount Tru-Turn aluminum spinners onto the following engines:
Zenoah G45 and G62
The design of this adapter kit is based on the use of a spinner
and prop that is normally best suited for the engine in question.
Use this adapter kit to fit Tru-Turn products with your engine.
17mm Wrench To Tighten Bolt
Tru Turn Spinner
Screw Length: 2" (50mm)
Washer Size -
Inner Diameter: 10mm
Approx. Weight: 1.2 oz
In addition to this adapter, your Zenoah G45 or G62 engine requires
a precision modification to the backplate of the spinner. The .375
hole must be precision reamed to .394 & it must be done accurately.
For the Zenoah G23 engine, use TRUQ4025.
– If you need more information, use these Tru Turn resources –|
Web Site: http://www.tru-turn.com/
ROMCO MANUFACTURING, INCORPORATED
PO BOX 1896
DEER PARK, TX 77536
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following: