Blue anodized shock bodies
Threaded shock bodies
Team Integy logo and web address printed on the piggyback (reservoir)
The piggyback design is built to reduce air bubbles and provide
additional shock oil volume.
Comes with two 20lbs rate springs (red) and two 25lbs rate springs
Blue anodized inboard shock mounts
Assembled with two hole pistons, but the shocks are not filled
Four assembled shocks (shocks comes without oil)
Four, four hole shock pistons (two holes come installed)
Four shock bushings
Four 3mm X 10mm allen head screws
Four 3mm x 15mm countersunk head screws
Four 3mm X 3mm set screws
Four piggyback (reservoir) foam inserts
Four aluminum spacers
Two aluminum inboard shock mounts
Team Integy recommends 90 weight silicone oil for the front and
110 or 120 weight for the rear.
Length: 4-1/8" (105mm)
Diameter: 5/8" ( 16mm)
For replacement shafts, order INTC1629.
For rebuild kit, order INTC1630.
updated jaw 09/22/06