Construction: Balsa and plywood
Wing: One-piece joined together with aluminum dihedral brace
Covering: Factory applied iron-on Red and White Oracover
Radio Compartment: Plywood reinforced, accessible under wing
Cowling: Pre-painted Red, fiberglass
Canopy: Single, solid color Silver
Landing Gear: Two main wires with nose gear wire, all 0.16" (4mm)
Aileron Control: Dual servo
Engine Mount: Nylon
Spinner: Red plastic
Wheels: Three rubber treaded 2.4" (60mm) diameter
Fuel Tank: Approximate 14oz (420cc) capacity
Building Time: Ready to fly in several hours
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent 0.16" (4mm) landing gear, three 2.4" (60mm) wheels,
nylon engine mount, 2.5" (64mm) spinner, 14oz (420cc) approx.
capacity fuel tank, wood servo trays aluminum wing joiner, hardware
package, foam padding and photo-illustrated instructions.
Engine: .40 -.46 cu in (6.5 - 7.5 cc) 2-stroke
OR .52 cu in (8.5 cc) 4-stroke
Muffler: Sports-style supplied with engine. Engine mounts on its
side with cowling cut away to expose engine and muffler
Servos: 6-Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder
Y-Harness: One, for aileron servos
Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing,
fuel filter, propeller, building and field equipment.
Wingspan: 56.7" (1440mm)
Weight: 5.73lb (2600g)
Length: 52.8" (1340mm)
Specs such as Wing Area and Wing Loading are not provided by the
Airfoil: Fully-symmetrical low-wing
Center of Gravity: 5.9" (150mm) Back from the wing's leading edge at
Elevator: Up & Down 0.47" (12mm)
Rudder: Right to Left 0.59" (15mm)
Ailerons: Up & Down 0.31" (8mm)
The box states that wheel pants are included. This is incorrect-they
are not used with this kit.
If a replacement fuel tank is needed, order the Sullivan 14oz flex
tank (SULQ1742), or the DuBro 14oz tank (DUBQ0214).
Some minor trimming and modifications may be required.