This is a Transmitter and Receiver Charging Lead Set for|
ALL Futaba Radio Systems EXCEPT for the 9VAP/9VHP Radios.
These Hobbico Charge Leads Make it Easy to Use the
Hobbico R/C Multi-Charger, AccuCycles, or the Scale Voltmeter.
Includes Both Transmitter and Receiver Leads w/Banana Plugs. They
plug directly into charging outlets (no soldering, crimping or
splicing plugs onto wires).
Plugs for All Futaba J Radios (but NOT for 9VAP/VHP)
Will work with other brands of chargers or voltmeters using banana
One 1 meter (39.37") long Transmitter Charge Cord w/Banana Plugs
One 1 meter (39.37") long Receiver Charge Cord w/Banana Plugs
For voltmeter use, these Tx plugs will work only with the 4NBL
and older "J" Series Radios (because of diode protection).
May also be used with the 5 or 7 Channel Radios, but it will require
a 9V connector (purchased at Radio Shack).
Transmitter plug will not work with the Futaba 8FG when used with the
updt mcw 7/12/04
updt jxs 05/02/11