Hobbico TorqMaster 90 Deluxe 12V

Tower Stock# LXL396  •  Manufacturer Stock# HCAP3200
Hobbico TorqMaster 90 Deluxe 12V (large view)
Quantity Discounts Available
Save $3.60
2 for $76.38
Save $6.00
3 for $113.97
Save $11.00
5 for $188.95
Notes from our tech department:
This is a Hobbico TorqMaster 90 Deluxe 12V Starter.
It is designed for starting Glow Engines up to .90 cubic inches in size.

*** 2-Year Warranty ***


An Aluminum Starter Cone with V-Groove for Boat Starter Belts and
Round Rubber Insert for Airplane Spinner Cones.
Starter has Self-Adjusting Carbon Brushes for Longer Lasting Useage
and Constant Contact with the Armature.
Easy-Press Start Switch makes Starting Easy Without Requiring Heavy
Finger Pressure and a built-in Finger-Guard promises Safe Starts.
Pre-Attached Alligator Clips for easy attachment to a 12V battery


One TorqMaster 90 Deluxe 12V Starter w/5' Cord & Alligator Clips.


Winding Resistance: 1.3 ohms Brush width: 3/16"
Weight: 3lbs and 6oz Current Draw: 11.6A load
Armature length: 2" RPM: no load 4500rpm, load 3100rpm
# of commutator contacts: 10 or 12 Measured torque: 310 oz-in at stall
Shaft thread size- 6mm-1.0mm


A 12V DC power source such as HCAP0800


Panel-Ready Version with pre-installed banana plugs is HCAP3205
The replacement rubber insert is HCAP3315 and aluminum cone HCAP3310
Optional Rubber Adapters are as follows:
Rubber Donut for Cars, use HCAP3320
Jumbo Insert for Large Spinners, use HCAP3330 and HCAP3325
Optional Starter Belts for Boats, Use: AQUB9530 (15"),
AQUB9531 (17") and AQUB9532 (19")
JAL 9/15/98

See Tower Catalog page 178.
Parts Compatibility
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐