This is a set of optional RPM Axle Carriers/Steering Blocks
                      for the Traxxas Revo.
         These will also work on the T/E Maxx 2.5R and 3.3 versions.

FEATURES: Constructed of molded composite material, blue in color
          Wall thickness around the pillow-balls has been increased by 40%
            eliminating split walls
          Over 20% more material supports the pillow-balls, preventing them
            from pulling through
          Redesigned reinforcing rib supporting tie rod mount
          Redesigned boot lock tabs for easier removal of the silicone boots
          Press-fit bearings in the carrier for reduced axle movement
          Two-piece pillow-ball set screws use aluminum and Delrin for the
            ultimate in holding power under extreme situations

INCLUDES: Two Axle Carriers/Steering Blocks
          Two 12x21x5mm Inner Bearings
          Two 6x15x5mm Outer Bearings
          Four Aluminum Set Screws
          Four Delrin Bushing Caps
          Instruction Sheet

REQUIRES: Installing on axles, no modifications required

COMMENTS: Replacement Bearing Set, RPMC8570
          Replacement Pillow-Ball Set Screws,  RPMC0800

          Do not use the Traxxas #5356 Long Travel Rocker Arm Set with these
            Axle Carriers.  Doing so will void the RPM warranty.

                                                                   jxs 11/23/05
                                                                         ir/jxs