This is a Giant Scale Servo by Tower Hobbies.
      This Servo is Used for Very Large Scale Cars, Trucks or Airplanes
                Where A Large Amount of Torque is Necessary.

FEATURES: One of the Strongest Servos Available Anywhere
          Dual Ball Bearings for Smooth Output and Precision
          Watertight Case
          Indirect-Drive Potentiometer
          Enormous Gear Train for Reliable Operation
          Universal Connector Fits Futaba, Hitec, JR, KO Propo, Airtronics Z
            and Tower Hobbies.
          One Year Warranty

INCLUDES: One Giant Scale Servo w/Universal Connector
          Three Extra Heavy Output Arms
          One Hardware Accessory Bag (Screws, Grommets, Eyelets)
          One Universal Y-Harness (See COMMENTS)

SPECS:             4.8V (4 cells)               6.0V (5 cells)
          Torque:  275 oz-in (19.8 kg-cm)       343 oz-in (24.7 kg-cm)
          Speed:   0.19 sec/60°                 0.14 sec/60°
          Current Drain:              Idle: 8mA
                         Running w/No Load: 700mA
          Signal Pulse: Positive Pulse Control 1520us Neutral
          Weight: 5.4oz (153g)
          Length: 2.6" (66mm)
          Width:  1.2" (30mm)
          Height: 2.3" (58mm)

COMMENTS: Universal Y-Harness: Because This Servo has a High Current Drain, the
            Y-Harness is Used to Plug the Servo Into the Receiver and Also to
            Wire Directly to the Battery Pack for A Power Sorce. This is Done
            so the High Current Does Not Damage the Receiver. It is Up To The
            Modeler to Hook Up the Power Supply Wire to the Battery.
            Diagram->   (male end) Servo-\---->Receiver (female end)
                                        \-->Power Sorce Battery (female end)
                                                                     JAL 2/4/99
                                                                          ir/jl
                                                            updated jpg 3/18/08