Airtronics Servo Adapter Air to JR/J/Z

Tower Stock# LXLX67  •  Manufacturer Stock# 479400
Airtronics Servo Adapter Air to JR/J/Z (large view)
Notes from our tech department:
This is a servo (or battery) adaptor to convert AIR STD servo (or battery)
to a Z-series receiver (or switch harness). This is an intermediate cord with
a female AIR STD socket on one end, and a male Z-series plug on the other end.


One adapter, with Blue Z male plug, 2" of wire which is
obviously crossed to mate properly with the Black AIR STD black
servo jack socket.


Servo with AIR STD plug (NOT Z, JR, or J) and a receiver which
has Z sockets (JR, J, or new Airtronics Z receivers).


"Z" is Airtronics new plug as of 1998 which is compatible with JR,
Futaba, Hitec. "AIR STD" is the old 'Black' Airtronics jack
which was shaped and wired differently.
Airtronics has a whole new line of servos with Z plugs, which CAN NOT
be plugged into their old receivers but CAN be used with JR, FUT,
and their new Z receivers.
EXAMPLE: This adapter would be used when a customer has an Airtronics servo
and wants to plug into Futaba/JR/Air Z receivers.

AMC 4/2/98

‐ Mailing Address ‐
‐ Additional Contact Information ‐