This is a servo (or battery) adaptor to convert AIR STD servo (or battery)
to a Z-series receiver (or switch harness). This is an intermediate cord with
a female AIR STD socket on one end, and a male Z-series plug on the other end.

INCLUDES:  One adapter, with Blue Z male plug, 2" of wire which is
           obviously crossed to mate properly with the Black AIR STD black
           servo jack socket.

REQUIRES:  Servo with AIR STD plug (NOT Z, JR, or J) and a receiver which
           has Z sockets (JR, J, or new Airtronics Z receivers).

COMMENTS: "Z" is Airtronics new plug as of 1998 which is compatible with JR,
          Futaba, Hitec. "AIR STD" is the old 'Black' Airtronics jack
          which was shaped and wired differently.
          Airtronics has a whole new line of servos with Z plugs, which CAN NOT
             be plugged into their old receivers but CAN be used with JR, FUT,
             and their new Z receivers.
EXAMPLE:  This adapter would be used when a customer has an Airtronics servo
          and wants to plug into Futaba/JR/Air Z receivers.

                                                              AMC  4/2/98