Duratrax Steering Servo Hold-Down Vendetta

Tower Stock# LXLYA5  •  Manufacturer Stock# DTXC8813
Duratrax Steering Servo Hold-Down Vendetta (large view)
Quantity Discounts Available
Save $1.20
2 for $25.78
Save $2.01
3 for $38.46
Save $3.70
5 for $63.75
Notes from our tech department:
This is the optional Graphite Steering Servo Hold-Down
for the Duratrax Vendetta.


Servo is captured between the chassis and the graphite hold-down
plate virtually eliminating servo movement and any chance of the
servo comming out of the model in a crash situation
Will work for both standard and mini size servos


One graphite steering servo hold-down plate
Two 21mm long blue anodized plate posts (for mini size servos)
Two 25mm long blue anodized plate posts (for standard size servos)
Two 2.5x8mm flathead screws (for mounting posts to chassis)
Two 2.5mm nylon insert lock nuts (secures the plate to the posts)
One 23mmx23mm piece of servo tape (secures the plate to the servo)


Installation following the included instruction sheet


Length: 2.28" (58mm)
Width: 1.22" (31mm)
Thickness: .079" (2mm)


Parts Compatibility
‐ Mailing Address ‐
‐ Additional Contact Information ‐