Perfect for adding more functions to large-scale planes, jets and
Plugs into one channel of any Futaba FM, PCM G3 or PCM 1024
receiver and provides an additional seven channels
All added channels are fully proportional, switch selectable and
feature endpoint adjustment (ATV) and failsafe
Easy to set up; preset for PCM 2048 resolution
Servo operation of 8 channels is possible with 1 channel
Servo operation speed of each channel can be set
Fail-Safe for each channel can be set
14MZ/FX-40 can accommodate up to 2 multi-proportional decoders
Channel expansion up to 28 channels is possible with the R5014DPS
Operating control setting, direction of operation change, and travel
possible for each multi-prop expanded channel
Futaba Multi-Proportional System Decoder.
Futaba 14MZ or FX-40 system using FM, PCM G3 or PCM 1024 receiver
Also 12FG or 12Z with software version of at least 1.31.
Due the different channel sequencing used by the transmitter
in the FASST mode the Mpdx will need to be plugged into channels
11 or 12 on your R6014FS or R6014HS.
Operation power requirement: 4.8 or 6.0V (4~5 NiCad batteries)
Current drain: 7.5mA
Number of multi-prop output channels: 8
Applicable modulation modes: PCM G3, PCM1024, PPM.
Multiplexing scheme: Pulse width division (PCM G3, PCM1024), time
Delay function: Programmable for each channel
Fail-safe function: F/S function/HOLD function can be selected for