This is the electric powered 1/10 scale
Tamiya Suzuki Super Swift 1600 On-Road Rally Car Kit.
FEATURES: Chassis: Resin monocoque M-03M design with extension for 8.8" (225mm)
wheelbase for sharp cornering
Drive: Front wheel
Motor: 540 motor with pre-attached leads
Speed Control: TEU-101BK with reverse
Ball Bearings: Eight 5x10mm in front and rear wheels, bushings in
gearbox
Shocks: Friction, plastic body
Gearbox: Enclosed
Differentials: Bevel gear, ball bearing-equipped
Transmission: Single speed
Body: .03" (.8mm) thick polycarbonate, clear and untrimmed
Tires: 2.3" (58.1mm) outer diameter, .96" (24.5mm) wide
Wheels: 11-Spoke .95" (24.2mm) wide 1.5" (38mm) outer diameter
Bumpers: Front and rear, rigid plastic
Suspension: Four wheel independent double wishbone
Camber Tie Rods: Fixed, non-adjustable,
(Camber refers to the angle at which the wheels sit vertically)
Steering Tie Rods: Adjustable
(Caster/Toe-in refers to the angle at which the wheels point inward
as viewed from above)
Steering: Bell-crank type with servo saver
INCLUDES: Tamiya Super Swift 1600 on-road car kit, 540 motor, clear body, tires
tire foam, plastic bumpers, spoke wheels, 20 tooth pinion gear,
tube of grease, wheel wrench, decals and illustrated instructions
REQUIRES: Radio: 2-channel with one servo
Radio Batteries: 8 AA size (for transmitter)
Battery: 6 flat pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
Misc. Items: Building and track equipment
SPECS: VEHICLE-
Length: 11.3" (347mm)
Width: 6" (168mm)
Height: 5.6" (138mm)
Weight: 1.91lbs (870g)
Wheelbase: 8.8" (225mm)
BODY-
Length: 13.7" (348mm)
Width: 6.8" (174mm)
Height: 4.6" (117mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
8 5x10mm Front and Rear Axles 1 DTXC1537
3 5x11mm Gearbox 2 DTXC1547
2 5x8mm Gearbox 1 DTXC1523
Body shown on box is painted yellow with all body trim and sponsor
decals from the 2005 Junior World Rally Championship (JWRC).
jxs 3/09/06
ir/jxs
|