This is the Great Planes ElectriFly Equinox LiPo Balancer.|
For LiPo (Lithium Polymer) battery packs with 2 to 5 cells,
assembled IN SERIES and wired for Balancing.
NOT Compatible with LiPo packs having a 2-pin Charge lead.
Regulates voltages of all cells in a Lithium Polymer pack to very
tight tolerances during Charge and Discharge functions and provides
a safe Charging and Discharging platform which is critical when
handling LiPo batteries
Eight status LEDs and pushbutton control
Gold plated banana plugs on input for easy connection to Charger/
Automatically checks for poor quality cells
Maximum current handling capacity is 3A (current of up to 6A maximum
is possible by using high-power adapters available separately.
1-year limited warranty
Unlike some Balancers, Equinox has two separate functions:
QUICK-BALANCE MODE: applies a small Discharge current to gently
Balance voltages of all cells in a LiPo pack.
INTERFACE MODE: allows the Equinox to be used with a separate Charger
or Discharger whereby it will monitor and control how each cell in
the LiPo pack is Charged or Discharged.
Balanced packs typically charge to the fullest possible safe voltage,
meaning more power to the motor system. Also, these packs generally
last longer as no individual cell becomes overcharged.
Overcharging is one reason why LiPo packs fail
Great Planes ElectriFly Equinox LiPo Balancer with 2S and 3S battery
adapters for ElectriFly, Venom, and ESky LiPos which are wired for
Interface Mode and Connection Flowchart and instruction manual
LiPo batteries with a compatible Balance Connector
CANNOT BE USED WITH LiPo PACKS NOT WIRED FOR BALANCING
Compatible Input Devices: LiPo Chargers and Dischargers ONLY
(operation based on nominal cell voltage of 3.7V per cell)
Cell Balancing Range: 2-series to 5-series LiPo packs (7.4-18.5V)
Max. Charge Current: 3A (over 3A requires special harness)
Discharge Termination: Auto-cut based on individual cell voltages
2.75V per cell in Quick-Balance Mode
3V per cell in Interface Mode (with separate Discharger)
Quick-Balance Mode Discharge Current: 120mA per cell
Overload Protection: 7.5A auto (spade) fuse
Dimensions: 3.23 x 1.57 x .59 in (82 x 40 x 15mm)
Weight: 1.55oz (43.8g)
The following adapters are available;
Equinox 2S-3S Replacement Adapters GPMM3161
Equinox 4S-5S Adapter Set GPMM3162
GPMM3183 EQUINOX 5S ADAPTERS FLTPOWER (3)
GPMM3185 EQUINOX 2S HI POWER ADAPTERS FLIGHTPOWER, THUNDERPOWER (3)
GPMM3186EQUINOX 3S HI POWER ADAPTERS FLIGHTPOWER, THUNDERPOWER (3)
GPMM3187EQUINOX 4S HI POWER ADAPTERS FLIGHTPOWER, THUNDERPOWER (3)
GPMM3188EQUINOX 5S HI POWER ADAPTERS FLIGHTPOWER, THUNDERPOWER (3)
adpt.info updt jxs 10/10/06