This is the Replacement Water Proof Switch Boot for the Hobbico EP Hammer Boat.
This switch cover is installed on top of the ESC ON/OFF switch.
FEATURES: Clear silicone construction
INCLUDES: One switch cover
One Black ON/OFF switch plate
Two 2x12mm roundhead machine screws
REQUIRES: Installation onto ESC switch.
SPECS: Length: 1" (25.4mm)
Width: .433" (11mm)
Height: .393" (10mm)
COMMENTS: Dimensions are for the complete switch cover with switch plate. This
item could be used for other similar sized switches with a switch
travel of 10mm or less.