This is the Hitec HS-985MG Coreless Ultra Torque Servo with
                   Hitec, JR and Airtronics Z Connector.

            Ideal for high performance aircraft up to 1/4 scale,
          30 and larger helicopters, and steering and throttle for
                1/8 and 1/10 scale on-and off-road vehicles.

FEATURES: Dual ball bearings
          Water and dust resistant
          Coreless motor
          Three metal gears and one Karbonite gear
          MOSFET motor drive
          Indirect drive potentiometer
          Gold plated contacts

INCLUDES: Hitec HS-985MG Coreless Ultra Torque Servo with 1.8" (45mm) diameter
            horn, 2.3" (59mm) double sided arm, 2.8" (72mm) double sided arm,
            1.5" (39.5mm) single sided arm, mounting hardware and info sheet

REQUIRES: Installing in model and connecting to receiver

SPECS:    Operating Speed: 0.16 sec/60° at 4.8V
                           0.13 sec/60° at 6V
          Output Torque: 133.31 oz-in (9.6 kg-cm) at 4.8V
          Weight: 2.18oz (62g)
          Size: 1.57 x 0.78 x 1.45" (40 x 20 x 37mm)

COMMENTS: A note on coreless motors: conventional servo motors have a steel
            core armature wrapped with wire that spins inside the magnets. In
            a coreless design, the armature uses a thin wire mesh that forms a
            cup that spins around the outside of the magnet eliminating the
            heavy steel core. This design results in smoother operation and
            faster response time.

                                                                    jxs 6/13/06
                                                                         ir/jxs