This is the Futaba S3115 Micro High Torque Servo.
              This servo replaces the Futaba S3101 Servo.
        This servo can produce high-current draw from your batteries.
         If using NiMH or LiPo batteries, make sure they are capable
                       of delivering sufficient amps.

FEATURES: Ideal for electric planes and small electric helis
          Nylon gears
          One year warranty

INCLUDES: Futaba S3115 Micro High Torque Servo
          One    1" (25.4mm) 4 arm servo horn (installed on servo)
          One  1.5"   (39mm) 4 arm servo horn
          One 1.75"   (45mm) straight servo horn
          One  1.4"   (35mm) diameter round servo horn
          Two eyelets
          Two rubber grommets
          Two 2x12mm washer head self threading screws (phillips head)

REQUIRES: Installing in aircraft and connecting to receiver

SPECS:                    4.8V
          Torque:      39 oz-in (2.8 kg-cm)
          Speed:      0.15 sec/60°
          Dimensions: 1.1 x 0.5 x 1.2" (1-1/8" x 1/2 x 1-3/16")(28 x 13 x 30mm)
          Weight:     0.60oz (5/8oz) (17g)
          Lead Length: 6.5" (165mm)

COMMENTS: Do not use S3115 servos with gas or high power engine models, large
           gliders, or other models that require high torque
          Using supply voltage higher than 4.8V or applying high load to the
           servo will shorten the life.
          Alway use the servo horn specially designed for this servo. Do not
           use conventional servo horns.
          Excessive force or shock to the servo horn may damage the ultra mini
           precision gears inside the servo.
          For replacement gears use part number FUTM3404

                                                                   jxs 11/16/06
                                                                  kpm12/06/2006
                                                                         ir/jxs
                                                             updated jpg 9/4/07