This is the 1/10 scale electric powered, radio controlled, Ready To Run
Traxxas Stampede off-road Monster Truck with the XL-5 Electronic Speed Control.
                            For ages 8 and above.

FEATURES: Chassis: Fiber composite tub .08" (2mm) thick, Gray in color
          Drive: Rear wheel
          Motor 550 size Traxxas Titan 12 turn, fan cooled
          Radio: Traxxas TQ two channel 27MHz AM with steering and throttle
            trim and reverse, throttle neutral adjust and high torque
            waterproof steering servo
          Battery: 7-cell hump 3000mAh NiMH
          Battery Charger: 110V AC powered
          Shocks: Oil-filled plastic bodied, tunable and rebuildable
          Gearbox: Closed
          Body: Painted with decals pre-applied
          Differential: Maintenance free, planetary gear type with hardened
            steel internal gears
          Transmission: Single speed, Traxxas Magnum 272 with ball bearings,
            hardened steel gears and Revo spec Torque-Control slipper clutch
            with semi-metallic pads and heat dissipating finned aluminum
            alloy pressure plates for smooth linear engagement and consistent
            traction control
          Ball Bearings: Installed in transmission, bushings throughout
            remainder of kit
          Tires: Talon 2.8" (71mm) wide, 5" (127mm) diameter with foam inserts
          Wheels: 5-spoke chrome 2.8" (71mm) wide, 2.75" (70mm) diameter
          Speed Control: Traxxas XL5 Electronic with forward, reverse and brake
            waterproof for all weather driving, exclusive half-power profile
            limits throttle to 50% for inexperienced drivers, EZ-Set push-
            button setup, 3 drive profiles
          Bumper: Front plastic kickup type, Black in color
          Camber Tie Rods: Non-adjustable
          Steering Tie Rods: Adjustable
          Steering: Bell-crank type with servo saver

INCLUDES: Traxxas Stampede chassis with oil-filled shocks, 550 motor,
            XL-5 Electronic Speed Control, painted body, tires, foam inserts,
            wheels, 19 tooth and 23 tooth pinion gears, 86 tooth spur gear,
            TQ AM radio with high-torque servo, 7 cell hump NiMH 3000mah
            battery, AC charger and illustrated instruction manual

REQUIRES: Radio Batteries: Eight AA size for transmitter
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length: 16.25" (413mm)
          Width:     13" (330mm)
          Height:   9.5" (241mm)
          Weight:   2.98lbs (1355g) approx.
          Wheelbase: 10.75" (273mm)
          Front and Rear Tread:  10.5" (266mm) side-to-side at wheel centers
          Front and Rear Track: 12.75" (324mm) side-to-side at wheel edges
          Ground Clearance: 2.4" (60mm)
          Gear Ratio: 4.5:1 with stock 19T pinion gear
                      3.7:1 with optional 23T pinion gear
          Tires-Front and Rear: 2.8" (71mm) wide, 5" (127mm) diameter
            BODY-
          Length:     16" (406mm)
          Width:     6.3" (160mm) at rear wheels (widest point)
                     5.5" (141mm) behind from wheels (thinnest point)
          Height:    4.3" (109mm)

COMMENTS: For Replacement Ball Bearings and to Upgrade From Bushings Use:
            Qty.  Size      Location              Qty.    Bearing Set
             4  5x11mm     Front Wheels            2       DTXC1547
             4  5x11mm     Rear Wheels             2       DTXC1547
             4  5x11mm     Transmission            2       DTXC1547
             1  5x11mm     Spur Gear               2       DTXC1547

          The Stampede XL-5 is available in the following body colors and radio
            channels; Channel  A2  Red    TRAC23A2
                      Channel  A4  Black  TRAC23A4
                      Channel  A5  Silver TRAC23A5
                      Channel  A6  Blue   TRAC23A6

                                                                    jxs 7/26/06
                                                                         ir/jxs
                                                              update JAW 3/3/09