Tru Turn Short Shaft Double Jam Nut Kit 1.00 Twin Saito

Tower Stock# LXNV03  •  Manufacturer Stock# 0717A
Tru Turn Short Shaft Double Jam Nut Kit 1.00 Twin Saito (large view)
Quantity Discounts Available
Save $1.26
2 for $26.72
Save $2.10
3 for $39.87
Save $4.62
6 for $79.32
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is an Adapter Kit Used To Mount Tru Turn Aluminum Spinners Onto The:
Newer (Post-99) Saito .50 - 1.00 4-Stroke Engines.

**This kit requires reaming of the front of propeller**
**to 1/2" (13mm) diameter for proper thread make up of**
**adapter to the Saito short crankshaft. Ream to a depth of 3/8" (9mm).**


Steel Adapter Nuts Screws Onto The Crankshaft Holding the Propeller
On, Then A 10-32 Bolt Screws Into The Nut From Front, Holding The
Spinner In Place.
This Adapter Can And Should Be Used In Place Of The TT-718-A or
TT-716-A (Neither Carried) In Any Application Where A Short Shaft
Double Jam Nut Kit Is Needed.


One Short Shaft Double Jam Nut Adapter Kit


1/2" End Wrench To Tighten
Tru Turn Aluminum Spinner


Crankshaft Thread Size: 7 x 1.0mm
Spinner Mounting Bolt Thread Size: 10-32


Use The Saito Aluminum Washer Under Your Tru Turn Adapter Nut
and Washer, Then Check Closely For Threads Bottoming Out Or
Tru Turn Will Modify Backplate For A Small Fee and Postage Paid.
The 10-32 Bolt That Is Included With The Spinner Might Require
Cutting, Depending On The Prop Used.
JAL 6/11/99
updt jxs 8/16/06

‐ Mailing Address ‐
‐ Additional Contact Information ‐