This is the Futaba 2.4GHz TM-14 Module for the 14MZ, 12Z and 12FG systems.
        The software of the 50MHz and 72MHz 12FG, 12Z and 14MZ systems
               must be updated prior to installing this module.

       This module is compatible only with Futaba 14MZ, 12Z and 12FG
   systems which utilize the United States region code.  If your transmitter
       does not utilize this region code, the TM-14 module may not be
                      compatible with your transmitter.

     A Memory Card is required, see REQUIRES below for Memory Card type.

               The software is available free of charge on the
                Futaba Flyers Club website www.14mz.com/forum/
                       and also on www.2.4gigahertz.com.

FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) transmits
            a large amount of information to the receiver at extremely fast
            speed
          Simple plug-in installation-no transmitter modifications needed
          Ultra fast channel shifting eliminates interference and eliminates
            the hassle of waiting for frequencies to open up
          One year limited warranty

INCLUDES: Futaba 2.4GHz Module with instruction manual and plastic module cover

REQUIRES: Receiver: Futaba 2.4GHz FASST
          Memory Card: The Compact Flash Memory Card is included
            with the 14MZ and can also be used with the 12Z. Also, a CF
            memory card can be purchased from an electronics store
          The 12FG system requires an SD memory card which is not carried and
            must be purchased separately

SPECS:    Communication Method: One-way operation system
          Transmission Antenna: Mono-pole

COMMENTS: In order to take full advantage of the FASST technology the FASST
            R6014FS Receiver must be used with this module.

                                                                     ajw 4-5-07