This is the Futaba 12FGA Transmitter and R6014HS 14-ch Receiver with the
                          2.4GHz FASST system.

This version is Mode 2-Left Hand Throttle and Right Hand Elevator, USA Standard

    If your transmitter's region code is something other than the United
 States,the TM-14 Module sold in the United States is not compatible with this
   transmitter.  As such, it is necessary to purchase the TM-14 module which
                 matches the region code of the transmitter.

 When you improve upon all of the best that Futaba 2048 technology has to
 offer,you have the 12FG-one serious system for discerning R/C pilots. From the
 state-of-the-art receiver to the capacity to store memory for a whopping 1,882
 models, the 12FG has the features and functions to position itself far above
 the competition. And because it's from Futaba, you can fly with confidence,
 knowing that the industry's finest research and development is behind you.

         Contains software for airplanes, helicopters and gliders.
      This is the airplane version which will default to airplane settings,
with mode 2 stick operation when powered up and has a ratcheted throttle stick.

 For the latest information about the 12FG visit the manufacturer's web page
 at www.2.4gigahertz.com. Some the of the system's most impressive highlights
 include the following:

FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts
            very quickly virtually eliminating signal conficts and
            interruptions unlike other 2.4GHz systems that only stay on one
            or two frequencies
          Dual antenna diversity enables FASST system to automatically and
            seamlessly select the best reception between the two antennas
            built into the receiver ensuring that the aircraft stays under
            constant control of transmitter regardless of altitude
          Pre-Vision Packet Screening technology scans incoming data for
            potential problems and applies sophisticated error correction
            techniques for solid impenetrable link with model
          Easy Link system features a unique ID code in the transmitter that
            links to the receiver insuring that receiver only follows commands
            from this transmitter-with over 134 million possible codes there
            is no chance for a conflict
          No hassle Fail Safe programmed through transmitter-no complicated
            set-up steps or binding plugs
          When performing a ground check, the Power Down function allows
            modeler to reduce power from up to 50+ paces away-like retracting
            the antenna on a conventional transmitter
          Purpose built custom IC chips for key functions; no off-the-shelf IC
            chips
          Digital trims on all 4 main channels
          Ergonomic rubber grips
          Quad-bearing gimbals
          Ultra-precise tuning in .5% increments
          255X196 LCD scren with adjustable contrast
          One year limited warranty

          Programming Features:
            Thirty model memory
            Programming for airplane, glider and helicopter models
            Supports 13 wing types, 3 tail types and 8 heli swash tupes
            Eight flight conditions
            Variable dual rates
            Servo grouping for servo synchronization
            Newly designed "joystick" button and Dial-N-Key editing for easier
              menu navigating
            Stick Mode-Choose from Modes 1-4
            Twenty-seven pre-programmed mixes, with built-in shortcuts
            Three swashplate types
            Five-Point Normal and Idle Up Throttle/Pitch Curves
            Revo, Gyro and Swash to Throttle mixing
            Swash AFR Adjustable Function Rate for use w/ 3S or 3E swash types

INCLUDES: Futaba 12FGA Transmitter
          7.2V 1700mAh NiMH Transmitter Battery
          R6014HS Receiver, FUTL7645
          Heavy-Duty Switch Harness
          Futaba Orange Transmitter Neck Strap
          120V AC Battery Charger (FUTM1805)

REQUIRES: Servos depending on type of aircraft
          4.8V receiver battery of modeler's choice

SPECS:    Transmitter;
            Power Supply: 7.2V
          Receiver;
            Power Requirement: 4.8 - 6V

COMMENTS: This radio is available in other default mode,
          FUTK9276 Heli Mode 2
The only chargers that will work with the 12FG is FUTM1805 (which is included w
ith the radio system) OR FUTM4160 which will require charge leads FUTM4236.

COMMENTS: This system can also be operated on 72MHz or 50MHz by purchasing the
            Transmitter Antenna (FUTM5118), and the 72MHz Module (#HSP78899)
            or the 50MHz Module (#HSP79189)-both must be purchased through
            Hobby Services) and using a compatible receiver.

                                                                     ajw 4-5-07
                                                            updated jpg 1/30/08
                                                            updated MAF 1/9/9
                                                               updt jxs 7/21/09