Great Planes Seawind Seaplane ARF 39.5"

Tower Stock# LXSAG3  •  Manufacturer Stock# GPMA1169
Great Planes Seawind Seaplane ARF 39.5
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Notes from our tech department:
This is the electric powered, radio controlled, almost ready to fly
Great Planes Seawind Seaplane.
For Intermediate to Advanced Modeler/Fliers.
Park Pilot Program Legal Aircraft
Can perform ROW (Rise Off Water) takeoffs and also hand-launched
and landed on grass.


Construction: Aerocell foam, painted, color scheme is Blue and
Wings: One-piece
Fuselage: EPS foam with plywood servo tray and pushrods pre-installed
Radio Compartment: Accessible through removable canopy/hatch which is
secured by rare earth magnets
Cowling: Painted plastic
Canopy: Clear molded plastic with two profile pilot figures and
instrument panel detail
Aileron Control: Single servo
Propeller: Great Planes 8x6 Power Flow Slo-Flyer (GPMQ6610)
Spinner: Three foam, Blue in color 1.2" (30mm) diameter
Hardware: Full set included
Building Time: Ready to fly in 2-3 hours
Motor Mount: Constructed of plywood and pre-installed
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
date of purchase.


ElectriFly by Great Planes Seawind Sport Scale Seaplane, all hardware
photo-illustrated instructions, cradle support stand, 8x6 propeller
prop adapter and decals


Electric Motor: 28-30-950 Brushless Out-runner
ESC: SS-25 for Brushless motors
Radio: 4-channel with mini receiver
Servos: Three micro size
Servo Extension: One 6" (150mm) for aileron servo
Battery: 11.1V 910-1500mAh LiPo
Battery Charger: LiPo compatible
Misc. Items: Foam safe CA or epoxy glue and building and field


Wingspan: 39.5" (1005mm)
Wing Area: 234 sq in (15.1 sq dm)
Weight: 24 - 26oz (680 - 735g)
Wing Loading: 14.8 - 16oz sq ft (45 - 49 g/sq dm)
Length: 33.5" (845mm)
Airfoil: Flat bottom
Center of Gravity: 1" (25.4mm) measured at fuselage when using
balancing stand
Control Throws- Low Rate High Rate
Ailerons: Up & Down " (6.35mm) 7/16" (11mm)
Rudder: Right & Left 1" (25.4mm) 1" (38mm)
Elevator: Up & Down 3/8" (9.5mm) 5/8" (16mm)


Seawind is a licensed trademark of Seawind/S.N.A., Inc. Seawind logo
is used with permission of Seawind/S.N.A., Inc.

The wing is secured to the fuselage with a M3x37
self tapping (S/T) screw. We do not currently jxs 6/25/07
sell any self tapping screws that long. ir/jxs

Know Before You Fly
Easy RC: Airplanes
Review #1
Review #2
Review #3
Manufacturer Mailing Address
Additional Manufacturer Contact Info