This is the 3-Channel Futaba 3GR-FS 2.4 GHz Two-Stick Radio for Surface Use
with the R603FF 2.4GHz FASST 3-Channel Receiver.
Virtually Identical to the 3PM but in a stick version.
Transmitter and receiver only, servos not included.
FEATURES: FASST (Futaba Advanced Spread Spectrum Technology) sends twice as
much information to the receiver at eight times the resolution of
standard systems for unsurpassed control and smooth servo travel
2.4GHz circuitry is wired directly into transmitter eliminating
separate plug-in modules
"Auto Detect" instantly determines whether HRS or PPM mode is active
in the transmitter
Pre-Vision scans incoming data and applies sophisticated error
correction techniques resulting in a system that provides a
solid impenetrable connection to the model
Transmitter has charge jack for optional rechargeable AA batteries.
Throttle stick adjustment (70/30 for nitro, 50/50 for electric)
Steering/Throttle trim, trim rate, dual rate and exponential
Steering/Throttle/3rd Channel reverse, EPA and sub trim
Brake mixing for large cars
One programmable mix
Condition change mixing
10 Model Memory
In addition to great performance in R/C car and truck applications,
this system is also ideally suited to the rigors of boat racing
INCLUDES: Futaba 3GR-FS 2.4 GHz 3-channel Transmitter
R603FF 3-channel Receiver (FUTL7631)
Switch Harness with J-Connector (FUTM4382)
REQUIRES: AA Batteries: Eight for transmitter
Servos and receiver battery of modeler's choice
SPECS: 3GR-FS 2.4 GHz Transmitter;
Current Drain: 250mA or less
Reception Antenna: External
Power Requirement: 6V NiCd battery
Size: 1.5 x 1 x .55" (39 x 26 x 14mm)
Weight .45oz (12.8g)
COMMENTS: If wanting to use rechargeable batteries, you can use any
AA Nicds you choose.
Order FUTM1830 for wall charger