This is the RPM True-Track Rear A-Arm Conversion in Black
                     for all versions of the Traxxas Revo.

FEATURES: Eliminates stock rear toe links, locking in the rear toe angle at
            1.5° per side for a total rear toe-in angle of 3°
          Eliminates all rear bump steer for better rear end tracking
            regardless of terrain
          Replaces lower pivot ball with a 4mm diameter hinge pin for constant
            rear toe angle
          Retains stock upper pivot ball to allow camber adjustments
          Weighs a total of 1-1/8oz (32g) less than stock components

INCLUDES: Two each Upper and Lower Rear A-Arms
          Two Axle Carriers
          Two 4mm Hinge Pins
          Four E-Clips
          Two 3x16mm Shock Mount Screws
          Two Aluminum Pivot Ball Set Screws
          Two Delrin Pivot Ball Bushing Cups
          Two 6x15mm Sealed Outer Bearings
          Two 12x21mm Sealed Inner Bearings
          Instruction sheet

REQUIRES: Removing stock rear components

COMMENTS: This True-Track system is compatible with the following RPM
            components;
            RPMC8237 Front Black A-Arms
            RPMC8238 Front Blue A-Arms
            RPMC8222 Black Front Upper and Lower Left A-Arms
            RPMC8585 RPM Axle Carriers/Steering Blocks

          Not compatible with the Traxxas #5356 Long Travel Rocker Set.

                                                                    jxs 4/08/08
                                                                         ir/jxs