This is the Associated Pro 8.0 Nitro Racing Engine.

FEATURES: Direct replacement engine for the Associated Monster GT 8.0 Monster
            Truck, ASCC0392
          Pro-Start backplate pre-installed
          Aluminum body slide valve carburetor
          SG (pilot) type crankshaft
          Ten fin anodized aluminum heatsink head

INCLUDES: Associated Pro 8.0 Nitro Racing Engine with Pro-Start Backplate,
            Slide Valve Carburetor and instruction sheet

REQUIRES: Fuel: Car Blend, 15-30% ODOP3320
          Glow Plug: Medium/cold for 1/8 scale applications
          Air filter kit: ASCC5730

SPECS:    Displacement: .50 cu in (8.0cc)
          Specs such as horsepower, bore and stroke were not provided by
            manufacturer
          Carburetor Settings-
            High Speed Mixture: Three turns counter clockwise from closed
            Low Speed Mixture: Five and one half turns counterclockwise from
              closed
            Idle Speed: Turn screw until throttle opening inside throttle
              valve is .050" (1.3mm)
          Weight: 14.5oz (410g)
          Distance Between Mounting Hole Centers Same Side: 0.67" (17mm)
          Distance Between Mounting Hole Centers Opposite Side: 1.6" (42mm)
          Height from Mounting Tab Bottom to Top of Cylinder Head: 3.9" (100mm)
          Height from Crankcase Bottom to Top of Cylinder Head: 4.6" (116mm)
          Length from Backplate to Front Bearing: 3.3" (83mm)
          Length from Backplate to Crankshaft End: 0.63" (116mm)
          Width at Mounting Tabs: 2.0" (50mm)
          Cylinder Head Diameter: 2.2" (56mm)

                                                                    jxs 6/25/08
                                                                         ir/jxs