This is the Radio Controlled, Glow, Gasoline, or Electric Powered
Almost-Ready-to-Fly Great Planes Performance Series Reactor 1.60 Scale Airplane
             IMAA Legal, this model is ideal for a flyer's first
                    giant scale aerobatic and 3D airplane.

FEATURES: Construction: Laser cut balsa and plywood with a foam sheeted turtle
            deck
          Wings: Two-piece, bolt-on with aluminum joiner tube
          Covering: TopFlite MonoKote
          Landing Gear: Pre bent aluminum  0.16" (4mm) thick
          Wheels: Main, 3.5" (88mm) diameter foam, tailwheel, 1" (25.4mm)
            rubber
          Radio Compartment: Hatch removes easily with four bolts
          Spinner: Aluminum 3.25" (82.5mm) diameter
          Cowling: Painted fiberglass
          Wheel Pants: Painted fiberglass
          Canopy: Clear molded plastic
          Aileron Control: Dual servo
          Elevator Control: Dual servo
          Fuel Tank: Approximately 24oz (720cc) for glow fuel, must purchase
            gasoline conversion kit and tubing if using gasoline engine
          Engine Mount: Two piece composite construction
          Hardware: Full set provided, IMAA legal
          Assembly Time: Only 15-20 hours
          Warranty Period: Great Planes guarantees this kit free from defects
            in both material and workmanship at the date of purchase.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            landing gear, wheels, wheel pants, cowl, fuel tank, wood servo
            trays, aluminum spinner two decal sheets, hardware package, photo-
            illustrated instructions

REQUIRES: Engine: 1.60 - 2.10 cu in (26 - 34cc) two-stroke OR
            2.00 - 2.20 cu in (33 - 36cc) four-stroke OR
            2.5 - 3.0 cu in (43 - 50cc) gasoline OR
            80-75-230 Outrunner Brushless Motor
          Radio: 5-6 channel, 6-channel computer radio recommended
          Servos: Eight, 7 high-torque, 1 standard ball bearing
          6" (152mm) Heavy Duty Servo Extensions: Two/inboard aileron control
          24" (610mm) Heavy Duty Servo Extensions: Two/outboard aileron control
          36" (914mm) Heavy Duty Servo Extensions: Three for tail servos
          1.5" (38mm) Large Scale Single Side Servo Arms: Seven
          Y-Harness: Two heavy duty
          Receiver Battery: 4.8 or 6V at least 4200mAh
          Heavy duty switch harness and charge jack
          #4 Plastic Washers: For cowl
          Misc. Items: Building and field equipment

SPECS:    Wingspan:     84.5" (2140mm)
          Wing Area:    1556 sq in (100.4 sq dm)
          Weight:       14 - 17 lb (6.35 -7.71 kg) depending on power setup
            selected
          Length:       85" (2160mm)
          Airfoil: Fully symmetrical
          Center of Gravity: 7" (178mm) from the leading edge of the root wing
            rib
          Control Throws:  Low             High              3D
          Elevator: 1"     (25mm) 10°  1-1/2" (38mm)  15°  3-1/4" (83mm)  34°
          Rudder:   2-3/4" (70mm) 16°  4-3/4" (121mm) 28°  5-3/4" (146mm) 35°
          Ailerons: 1-1/2" (38mm) 11°  2-1/2" (64mm)  19°  4-1/2" (114mm) 36°

COMMENTS: GPMQ9010 would be a great pilot for the plane with minor trimming

          Following is a list of MonoKote colors used to cover this model and
            order numbers for 6ft rolls;
              White     TOPQ0204         Sapphire Blue    TOPQ0226
              Orange    TOPQ0202         Missile Red      TOPQ0201

          If a replacement fuel tank is needed, order the Sullivan 24oz
            tank (SULQ1444), or the DuBro 24oz tank (DUBQ0224). They are 1oz
            smaller than the original tank.
            Some minor trimming and modifications may be required.

                                                                    jxs 5/16/08
                                                                         ir/jxs