AVCS System: (Heading Hold) Since the rudder trim changes
(caused by wind and other meteorological changes); the front,
rear, and other heli attitudes change and are automatically
cancelled; tail (rudder) operation is easy, making it perfect for
SMM Gyro Sensor: Use of this newly developed technology virtually
eliminates rudder trim changes during flight (see COMMENTS).
Integrated, compact and lightweight design made possible by high
density mounting technology.
Conductive Resin Case: This case improves EMC (Electrostatic and
electromagnetic interference) resistance.
One GY240 gyro
One mini plastic adjustment screwdriver
Three mounting pads
One instruction sheet
Length: 1-1/16" (27mm)
Width: 1-1/16" (27mm)
Height: ¾" (19mm)
Weight: 0.88oz (25g)
Voltage- use only with a 4.8V battery. (if you use it with a
higher voltage battery it needs to be regulated to 6V)
Can be used in helicopters and airplanes (Due to 0-100% Gain Adjust).
The new SMM (Silicon Micro Machine) technology is the integration
of mechanical elements, sensors, actuators and electronics all
brought together on a common substrate chip. This hobby industry
first, results in a gyro sensor with an unprecedented level of
functionality, reliability, and sophistication.
This gyro performs best when used with non-Digital servos.
updt jxs 7/07/03
updt mcw 1/14/04
updt jxs 2/14/05
updated jpg 3/16/06