Multiplex Easy Glider Pro Kit 72"

Tower Stock# LXVEN8  •  Manufacturer Stock# M214226
Multiplex Easy Glider Pro Kit 72
Easy Pay
Request 2 Payments ($55.00, $54.99) Details
Money Saving Combos
 
LZ2279
Notes from our tech department:
This is the radio controlled, glider or electric powered
Multiplex Easy Glider Pro almost ready to fly Sailplane.

FEATURES

Construction: Elapor foam to resist damage, white in color
Wings: Two piece with fiberglass wing joiner
Spinner: Elapor foam 2.2" (55mm) diameter
Aileron Control: Dual servo
Control Surfaces: Elevator, rudder and ailerons

INCLUDES

One Multiplex Easy Glider Pro with decal sheet, foam spinner, wing
joiner, pushrods, hardware and illustrated instruction manual

REQUIREMENTS

Radio System: 4-channel with micro receiver
Servos: Two micro size for elevator & rudder
Two nano size for ailerons
Servo Extensions: Two 16" (200mm) for aileron servos
Y Harness: For aileron servos
Battery: at least 2100mAh
Battery Charger: LiPo compatible
If building as glider only the following items are required;
NiMH Receiver Battery (at least 1800mAh)
Switch Harness with Charge Jack
Launching Kit
If installing electric power, the Brushless Motor Power Pack
(MPUG3226) is required
Building and Field Equipment: Medium viscosity regular (NOT styrofoam
safe) CA glue and activator, see COMMENTS

SPECIFICATIONS

Wingspan: 72" (1828mm)
Length: 44" (1117.6mm)
Flying Weight: 28.5oz (810g) with standard power system
Wing Loading: 6.5 oz sq ft (20 g sq/dm) with standard power system
Wing Area: FAI approx. 645 sq in (41.67 sq dm)
Airfoil: Semi symmetrical
CG (Center of Gravity): 2.7" (70mm) from leading edge at wing root
measured at fuselage side
Control Throws-
Elevator, Up and Down: 0.31-0.39" (8-10mm)
Rudder, Left and Right: 0.59-0.79" (15-20mm)
Ailerons, Up: 0.59" (15mm)
Down: 0.24" (6mm)
Spoilers-Both Ailerons Up: 0.79" (20mm)
Spoiler Mixer (Elevator Trim Compensation): 0.16" (4mm)

COMMENTS

This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with an
activator is the only method of gluing recommended by the
manufacturer.

jxs 7/21/08
ir/jxs

Resources
Know Before You Fly
Easy RC: Sailplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐