This is the electric powered, radio controlled, almost ready to fly
ElectriFly by Great Planes Yak 54 3D Indoor Airplane.
Park Pilot Program Legal Aircraft
For Intermediate Modeler/Pilots.
For indoor flight only.
FEATURES: Construction: Lightweight 0.12" (3mm) extruded polystyrene Pro-
Formance foam-an ElectriFly exclusive, alignment jigs aid in fast
assembly and correct alignment, pre-applied graphics are lighter
weight than paint
all flying surfaces pre-hinged with genuine 3M Blenderm tape
which is durable and feather light
Wings: One-piece
Aileron Control: Single servo
Landing Gear: 0.08" (2mm) diameter wire with carbon tail skid
Wheels: Two 1" (26mm) diameter hard plastic
Hardware: Carbon fiber and laser cut
Building Time: Ready to fly in 2-3 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.
INCLUDES: ElectriFly by Great Planes Yak 54 3D Airplane, instruction manual,
decal sheet, landing gear and hardware
REQUIRES: Radio: 4 channel
Servos: Three micro high torque (1-rudder, 1-elevator, 1-aileron)
Battery Charger: LiPo compatible
Motor: Rimfire Outrunner Brushless
ESC: 8A Silver Series For Brushless Motors
Battery: Power Series 7.4V 300mAh Balanced 2S 20C LiPo Pack
Propeller, building and field equipment
SPECS: Wingspan: 32" (820mm)
Wing Area: 270 sq in (17.4 sq dm)
Weight: 5.5 - 6.7oz (155 - 190g)
Wing Loading: 2.9 -3.5oz/sq ft (9 - 11g/sq dm)
Length: 36.5" (920mm)
Center of Gravity: 3/4" (19mm) in front of + mark on fuselage
Control Throws-
Low Rate 3D Rate
Elevator: 1-3/4" (44mm) 30° 2-3/4" (70mm) 52°
Rudder: 1-3/4" (44mm) 20° 4" (102mm) 53°
Ailerons: 2" (51mm) 27° 3-1/2" (89mm) 53°
jxs 10/14/08
ir/jxs
| 
Primary Accessories
Primary Accessories
