Futaba FASSTPak-A R617FS Rx/4-S3004 Servos/NiCd Air

Tower Stock# LXVVU4  •  Manufacturer Stock# FUTL1170
Futaba FASSTPak-A R617FS Rx/4-S3004 Servos/NiCd Air (large view)
Easy Pay
Request 3 Payments of $53.33 Details
Notes from our tech department:
This is the Futaba FASSTPak-A with the R617FS Receiver,
NR-4J 600mAh Receiver Battery and four S3004 Servos.
**Compatible only with Futaba 2.4GHz FASST radio systems.**


Designed for modelers who want to use a single radio transmitter to
fly several different model aircraft
One year limited warranty


R617FS 7-channel Receiver, FUTL7627
NR-4J Receiver Battery, FUTM1280
Four S3004 Ball Bearing Servos w/Universal Connector, FUTM0004
Four 0.82" (20.9mm) diameter Round Servo Horns
One 1.53" (38.9mm) diameter Four Point Horn
Four 1.25" (31.8mm) diameter Six Point Horns
9" (229mm) Servo Extension, FUTM3910
Switch Harness and Charge Cord, FUTM4370
Mounting screws, grommets and eyelets


Installing in aircraft


Size: 1.6 x 1.1 x .35" (40 x 27 x 9mm)
Power Requirement: 4.8 - 6V
Current Drain: 80mA (at no signal), 74 mA(w/ signal no servos on 4.8)
Weight: 0.34oz (9.8g) with case, 0.25oz (7g) without case
NR-4J Receiver Battery
Length: 2.25" (57mm) Weight: 3.3oz (93g)
Width: 1.97" (50mm) Voltage: 4.8
Thickness: .56" (14.2mm) mAh Rating: 600mAh
Cell Size: AA
Speed: .23 sec/60 @ 4.8V .19 sec/60 @ 6.0V
Torque: 44 oz-in (3.2 kg-cm) at 4.8V 57 oz-in (4.1 kg-cm) at 6.0V
Length: 1.6" (41mm)
Width: .8" (20mm)
Height: 1.4" (36mm)
Weight: 1.3 ounce (37.2 grams)
Connector: Universal type with approx. 5" (127mm) wire

jxs 02/02/09

See Tower Catalog page 164.
Parts Compatibility
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐