This is a Glow Plug Igniter with AC Charger from HPI Racing.|
The glow starter is used to heat a glow plug while starting an engine.
Lavender battery shrink wrap.
NiCd cell provides higher voltage under a load than an alkaline cell.
Spring-loaded locking socket design.
Comes on a picture instruction header card.
One glow starter with sealed sub-C size NiCd battery
One AC charger (United States Standard)
Charging of NiCd battery for ten hours before use.
Adaptor Input: AC 120V~60Hz 2W (United States Standard)
Adaptor Output: DC 1.25V at 170mA
Shaft Length: 2-1/4" (57mm)
Battery for this glow-starter cannot be replaced.