This is the 1/10 scale electric powered, radio controlled,
       Tamiya RC Imprezza WRC Monte Carlo '07 On and Off-Road Car Kit.

FEATURES: Chassis: Monocoque bathtub DF03Ra 078" (2mm) thick, battery
            installs through bottom of chassis
          Drive: Four wheel shaft drive
          Motor 540 size
          Electronic Speed Control: Tamiya TEU-101BK with reverse
          Ball Bearings: Full set
          Shocks: CVA oil filled Super Mini
          Gearboxes: Sealed
          Differentials: Ball type
          Tires: Rally block 2.7" (69.5mm) diameter,   1" (26mm) wide
          Wheels: 10 spoke plastic, tan in color 1.9" (48mm) diameter,
              1" (26mm) wide
          Body: Clear untrimmed polycarbonate Subaru Imprezza WRC with rear
            wing
          Bumpers: Front urethane
          Spur Gears: One each 75 tooth and 78 tooth
          Pinion Gears: One each 29 tooth and 32 tooth
          Suspension: Four wheel independent double wishbone with two types of
            rear suspension arms to allow wheelbase adjustment enabling use of
            short wheelbase 9.8" (251mm) bodies
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Bell-crank type

INCLUDES: Tamiya RC Imprezza WRC Monte Carlo '07 car kit with oil filled shocks
             540 motor, body with wing, tires, foam inserts, decals, wheels
             29 & 32 tooth pinion gears, 75 & 78 tooth spur gears and
             illustrated instruction manual

REQUIRES: Radio: 2-channel with 1 standard servo
          Radio Batteries: (8) AA size
          Battery: 6-cell with standard connector
          Charger: AC/DC timed or peak for 6-cell battery
          Paint: Spray or brush-on of modeler's choice
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:    17.5" (446mm)
          Width:      7.3" (186mm)
          Height:     5.8" (148mm)
          Wheelbase: 10.1" (257mm)

            BODY-
          Length:    17.4" (441mm)
          Width:      7"   (178mm)
          Height:     4.7" (120mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                Qty. Bearing Set
              4   10X15mm   Differential              DTXC1595  (2)
              8    5X8mm    Differential              DTXC1523  (4)
              2    5X10mm   Differential              DTXC1535  (1)
              3    5X9mm    Differential              DTXC1531  (2)
              1    3X8mm    Differential              N/A
              8    5X11mm   Hubs                      DTXC1547  (4)

                                                                   jxs 11/10/08
                                                                         ir/jxs