Associated Reedy 121VR .21 Buggy Engine

Tower Stock# LXWZA1  •  Manufacturer Stock# 800
Associated Reedy 121VR .21 Buggy Engine (large view)
Notes from our tech department:
This is the 121VR 0.21 Off-Road Competition Nitro Buggy Engine
from Team Associated.


3+1 port chrome plated cylinder
High silicon CNC machined piston
Knife edged 7075 aluminum connecting rod
Polished turbo scoop crankshaft with silicone insert
Chrome plated back plate with turbo scoop
Precision ball bearing supported crankshaft
Lightweight machined aluminum heatsink head
Oversized finned turbo head button
Thermo insulated screw mounted 2-needle carburetor
7.0mm, 8.0mm, and 9.0mm air restrictors


One 121 .21VR Off-Road Competition Nitro Buggy Engine with slide
valve carburetor, exhaust seal, 6mm and 7mm carb restrictors, and
instruction manual


Turbo glow plug, air filter and filter oil, glow ignitor, 30% nitro
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.


Displacement: .21 cu in (3.46cc)
Bore: 16.6mm (0.65")
Stroke: 16.0mm (0.63")
Maximum RPM: 40,000
Weight: 352g (12.4oz)
Distance Between Mounting Holes Same Side: 21mm (0.83")
Distance Between Mounting Holes Opposite Side: 38mm (1.5")
Height Bottom of Mounting Tabs/Top of Cylinder Head: 94mm (3.7")
Width of Mounting Tabs: 8mm (0.31")
Distance from Backplate to Front Bearing: 64mm (2.5")
Distance from Center of Engine to Front Bearing: 42mm (1.7")
Distance from Center of Engine to Backplate: 22mm (0.87")

cnh 6/22/09

Easy RC: Engines
‐ Mailing Address ‐
‐ Additional Contact Information ‐