This is the Tekin RX8 1/8 scale Electronic Speed Control.

    **If installing in the Ofna NEXX 8 Buggy, the Tekin Hotwire Interface**
           **(TEKM1450) MUST be used to set up the ESC correctly.**

FEATURES: Compatible with brushless and brushed motors
          D2 Dual Drive Mode technology switches from sensored to sensorless
            drive modes seamlessly
          2S-6S LiPo battery compatible
          PC interface for custom programming
          Adjustable drag brake, brake/reverse strength, current limiter,
            neutral width, throttle profile, motor type and voltage cut-off
            settings
          Heatsink and fan with auto-on temp setting
          Sensor plug for precise commutation with all motors
          Pit tune mode allows adjusting settings without using transmitter
          Self test diagnostics and factory reset
          DGF2 digital glitch filtering V2
          120 day limited warranty through manufacturer

INCLUDES: Tekin RX8 1/8 scale Electronic Speed Control, 12 gauge motor and
            battery wires, universal receiver connector, fan and instruction
            sheet

REQUIRES: Soldering motor and battery wires to posts
          Connectors of modeler's choice

SPECS:    Controls: Forward/Brake/Reverse
          Input Voltage: 2S - 6S LiPo
          Continuous Current: 210 Amps
          BEC: 6.0V/5.0A
          Motor Limit: None
          Throttle Profiles: 7 choices (on-board)
          Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
          Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
          Dimensions: 1.5 x 2.2 x 1.4" (38 x 56 x 35mm)
          Weight: 2.7oz (76.5g)

                                                                    jxs 7/14/09
                                                                         ir/jxs