This is a Heavy Duty Switch Harness for Futaba Radios with J connectors.
It is intended for use in giant scale models with large numbers of
servos, especially those with high current draw (torque/speed/digital).
The switch harness connects the receiver battery to the receiver by way of an
ON/OFF switch. It also allows you to charge the receiver battery without
removing it from the model.
High Current Capacity 20AWG wire (normal is 24AWG)
Large Physical size and Connections for High Drain Uses
One Switch Harness w/ J Connectors and Charge Cord.
Distance between mounting holes Ctr-Ctr: 28mm Width: 39.2mm" Thickness: 14mm Height of switch body: 18.2mm Height from bottom of switch body to tip of switch: 26.7mm
Battery Lead has a female Futaba J connector with a 6" lead Charger Lead: has a female Futaba J connector with a 6" lead Receiver Lead: has a male Futaba J connector with a 6" lead
updt jxs 4/23/04
updated jpg 7/2/12
– If you need more information, use these Futaba resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.