This is a Heavy Duty Switch Harness for Futaba Radios with J connectors.|
It is intended for use in giant scale models with large numbers of
servos, especially those with high current draw (torque/speed/digital).
The switch harness connects the receiver battery to the receiver by way of an
ON/OFF switch. It also allows you to charge the receiver battery without
removing it from the model.
High Current Capacity 22AWG wire (normal is 24AWG)
Large Physical size and Connections for High Drain Uses
One Switch Harness w/ J Connectors and Charge Cord.
Distance between mounting holes Ctr-Ctr: 28mm
Height of switch body: 18.2mm
Height from bottom of switch body to tip of switch: 26.7mm
Battery Lead has a female Futaba J connector with a 6" lead
Charger Lead: has a female Futaba J connector with a 6" lead
Receiver Lead: has a male Futaba J connector with a 6" lead
updt jxs 4/23/04
updated jpg 7/2/12