Traxxas Battery Hold-Downs E-Maxx (2)

Tower Stock# LXXF69  •  Manufacturer Stock# 3923
Traxxas Battery Hold-Downs E-Maxx (2) (large view)
Quantity Discounts Available
Save $.96
3 for $20.91
Save $2.16
6 for $41.58
Save $4.80
12 for $82.68
Notes from our tech department:
This is the Replacement Battery Hold Down Set for the Traxxas E-Maxx Truck.
These hold downs screw directly into the chassis.


Black nylon construction
Adhesive backed foam strips
Posts to accomodate either flat packs or side-by-side packs.


Two battery pack hold downs
Two 140mm adhesive foam strips
Four 12x45mm adhesive foam strips
Six 10x45mm adhesive foam strips
Four 3mm hold down posts
Two 3mm shoulder screws
Four clips


Assembly onto chassis


Length of Battery Hold Downs: 158mm
Length of Hold Down Posts: 22mm
Length of Shoulder Screws: 20.5mm


If flat packs are being used, the two shoulder screws can be used
(one on each hold down) with the battery hold downs inverted so
that the hold down can simply be swung out of the way to remove the
pack after the other end has been unclipped. If side-by-side packs
used, then all four posts with clip holes need to be installed
so that the hold downs can be completely removed in order to take
take out the packs.
cmc 1/21/01

‐ Mailing Address ‐
‐ Additional Contact Information ‐