This is the radio controlled, electric powered, 1/10 scale
           Rover Mini Cooper kit with the M-05 Chassis from Tamiya.

FEATURES: Chassis: Resin monocoque design, composite construction with
            extensions to build a short, medium or long wheelbase chassis
          Drive: Front wheel
          Shocks: Plastic body friction type
          Shock Towers: Composite construction
          Motor: 540 size
          Electronic Speed Control: Tamiya TEU-101BK,
          Gearbox: Sealed, integral with chassis
          Transmission: Single speed, ball bearing equipped
          Differential: Three bevel gear
          Suspension: Four wheel independent double wishbone
          Tires: Treaded 60D radial 0.98" (25mm) wide, 2.3" (59mm) diameter
            with foam inserts
          Wheels: 8 spoke gray, 0.94" (24mm) wide, 1.5" (38mm) diameter
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering: Three piece tie-rod linkage

INCLUDES: Rover Mini Cooper kit with M-05 chassis, tires, wheels, foam inserts,
            20 tooth pinion gear, shocks, ESC, motor and instruction manual

REQUIRES: Radio: 2-channel
          AA Batteries: 8 for transmitter
          Battery: 6-cell stick with standard connector
          Battery Charger: Peak type recommended
          Building and track equipment

SPECS:      Vehicle;
          Length:   12.4" (315mm)
          Width:     6.6" (167mm)
          Height:    5.3" (135mm)
          Wheelbases: 8.3" (210mm), 8.8" (225mm), 9.4" (239mm)
          Tread: 5.4" (138mm) center of wheels, side-to-side
            Body;
          Length:   12.2" (310mm)
          Width:     5.9" (151mm) behind front wheels, narrowest point
                     6.5" (166mm) at rear wheels, widest point
          Height:    4.1" (105mm)

COMMENTS: For Replacement or to Upgrade To Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             1   5x8mm    Counter Gear                 1   DTXC1523
             1   5x11mm   Counter Gear                 1   DTXC1547
             1   5x8mm    Spur Gear                    1   DTXC1523
             1   5x11mm   Spur Gear                    1   DTXC1547
             2   5x11mm   Output Shaft                 1   DTXC1547
             2   5x11mm   Front Axles                  1   DTXC1547
             2   5x10mm   Rear Axles                   1   DTXC1535

                                                                    jxs 7/08/09
                                                                         ir/jxs