This is the electric powered 1/10 scale, ready to run
                Tamiya Cusco Dunlop Subaru Impreza On-Road Car.

FEATURES: Chassis: TT-01 type E with shock tower now molded separately from
            the gear case covers and new upper deck with transponder mount
            new A parts (Uprights) made of polycarbonate plastic material
            new D parts (upper deck, motor cover and more) made of fiberglass-
            reinforced nylon material
          Drive: Four wheel shaft drive
          Electronic Speed Control: TEU-101BK with reverse
          Radio: Tamiya Finespec 27MHz 2-channel FM with steering and throttle
            trim and reverse
          Motor: 540 motor with pre-attached leads
          Ball Bearings: Installed in differentials, bushings in wheel hubs
          Shocks: Friction, plastic body CVA Super Mini
          Gearbox: Sealed, front and rear
          Differentials: Bevel gear, ball bearing equipped
          Transmission: Single speed
          Body: Painted and trimmed with mirrors, rear wing and sponsor decals
          Tires: Slick rubber 0.94" (24mm) wide, 2.6" (65.5mm) diameter
          Wheels: 10-spoke gray 2.0" (52mm) outer diameter, 0.94" (24mm) wide
          Bumper: Front foam
          Suspension: Independent double wishbone
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Non-adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Steering: Bell-crank type with servo saver

INCLUDES: Tamiya Cusco Dunlop Subaru Impreza On-Road Car, 540 motor, ESC,
            painted and trimmed body, slick tires, foam bumper, spoke wheels,
            19 tooth pinion gear, 61 tooth spur gear, decals, instructions and
            FM radio

REQUIRES: Radio Batteries: 8 AA size (for transmitter)
          Battery: 6-cell stick pack with standard connector
          Charger: AC/DC timed or peak for 6-cell battery
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length: 17.4" (444mm)
          Width:   7.4" (187mm)
          Height:  5.2" (132mm)
          Weight: Approx. 3.1lbs (1400g)
          Wheelbase: 10" (254mm)

             BODY-
          Length: 17.7" (451mm)
          Width:   7.6" (194mm)
          Height:  4.5" (115mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                       Bearing Set Qty.
            12   5 x11mm   front & rear diff gears, hubs  (use 6 DTXC1547)
             4   8 X12mm   front & rear diff gears        (use 2 DTXC1597)

          Body shown on box is painted black with all sponsor decals applied.

                                                                    jxs 10/8/09
                                                                         ir/jxs