This is the HPI Flux Tork 2200Kv Brushless Sensorless Motor
               and the Flux Blur Electronic Speed Control.

FEATURES:   Motor Features-
          Extra large heat sinks
          Giant silicone wires
          Bullet connectors for easy installation
          High efficiency design (85+%)
          Motor wires can be shortened
            Electronic Speed Control-
          Handles up to 6S LiPo power
          Fully programmable with the Castle Link USB Programming Kit
            (HPIC0573)-not included
          Integrated cooling fan
          Oversize ABEC-1 front and rear bearings

INCLUDES: HPI Flux Tork 2200Kv Brushless Motor, Flux Blur ESC, 6.5mm bullet
            motor connectors, 10AWG motor wires with two Deans Male Ultra Plugs
            on/off switch, receiver connector and instructions

REQUIRES: Installation on the vehicle

SPECS:      Motor-
          Max Input Volts: 25.2V
          Amp Rating*: 120A
          Weight: 424g (15 oz)
          Motor Diameter: 39.98mm (1.6")
          41.78mm (1.6") with fins
          Motor Length: 75.18mm (3")
          Shaft: 5mm (0.20")
          Bearings: Oversize ABEC-1 front and rear
          Connector: Female bullet type, 6.5mm
            Electronic Speed Control-
          Max Voltage: 25.2V maximum
          LiPo Handling Capacity: 6s
          Continuous: 120A
          Resistance: 0.0003 ohms per phase
          Brake: Proportional with adjustable curve
          Reversible: Yes - with lockout
          Low Voltage Cutoff: Programmable
          Size: 2.2" x 1.9" x 1.4" (56 x 48 x 35mm)
          Weight w/wires: 4.26oz (121g)

                                                                   jxs 12/21/09
                                                                         ir/jxs